How to Prepare a Crane Technical Specification: Industrial Crane Purchasing Guide
What Is a Crane Technical Specification?
A crane technical specification is a technical document that defines the capacity, working area, performance, mechanical and electrical characteristics, safety requirements and operating conditions of an industrial crane to be purchased.
When a factory plans to invest in an overhead bridge crane, gantry crane, jib crane or special process crane, requesting a quotation with only a statement such as “We need a 10-ton crane” is usually not enough.
This is because two cranes with exactly the same lifting capacity can be technically very different.
Consider two 10-ton overhead bridge cranes.
The first crane may:
Operate only a few times per day
Have a 10-meter span
Require a 6-meter lifting height
Normally handle loads of 3–4 tons
The second crane may:
Operate across three shifts
Have a 25-meter span
Require a 12-meter lifting height
Frequently handle loads of 8–10 tons
Although both systems have a nominal lifting capacity of 10 tons, their motors, gearboxes, brakes, wire ropes, wheels, bridge structures, duty classifications and electrical systems cannot be selected in the same way.
For this reason, a correctly prepared crane technical specification is critical for comparing quotations on a technically equal basis.
Why Should a Technical Specification Be Prepared Before Buying a Crane?
Industrial crane investments are long-term production infrastructure investments.
If the lowest purchase price becomes the only decision criterion, the facility may later face problems such as:
Insufficient capacity
Low operating performance
Frequent maintenance requirements
Excessive mechanical wear
Production losses
Spare parts problems
Reduced operator efficiency
The purpose of a technical specification is not to define a particular brand or product.
Its purpose is to clearly describe the actual operational requirements of the facility.
This allows quotations from different crane manufacturers to be compared according to the same technical criteria.
First Item in a Crane Specification: Crane Type
The first step is to determine which crane type is required.
The main crane systems include:
Overhead Bridge Crane
Used to serve a wide working area in indoor facilities or suitable industrial environments.
It may be designed as a single girder or double girder crane.
Gantry Crane
A crane supported by legs and commonly used in outdoor industrial areas.
Jib Crane
Used for localized lifting operations around a specific machine or workstation.
Process Crane
A crane that operates as a direct part of the production process and may require high duty intensity or specialized operation.
The crane type should be selected according to both the building structure and the production flow.
How Is Crane Capacity Determined?
One of the most important items in a technical specification is the SWL — Safe Working Load.
The purchasing team or project engineer should clearly answer:
What is the maximum total suspended load that the crane must lift?
The weight of the product alone should not be considered.
The weight of additional lifting equipment may also need to be included, such as:
Lifting beams
Electromagnets
Lifting fixtures
Special hooks
Grabs
Clamshells
Vacuum systems
Attachments
For example, if the product weighs 9 tons and the lifting beam weighs 1 ton, the total suspended load becomes 10 tons.
Therefore, crane capacity should always be selected according to the complete lifting operation.
What Changes Between 5 Ton, 10 Ton and 20 Ton Cranes?
Common commercial searches include:
5 ton overhead crane
10 ton overhead bridge crane
10 ton crane price
20 ton double girder crane
20 ton overhead crane
50 ton overhead bridge crane
However, as crane capacity increases, it is not only the hoisting motor that changes.
The following components may also need to be redesigned:
Bridge structure
Hoisting unit
Crane trolley
Wheel loads
End carriages
Brake system
Crane runway loads
Building supporting structure
For this reason, lifting capacity alone is not sufficient in a technical specification.
What Is Crane Span?
Crane span is the distance between the centerlines of the runway rails.
This dimension directly affects the bridge structure.
For example, a 10-ton crane with:
An 8-meter span
A 15-meter span
A 25-meter span
cannot use the same bridge design.
As the span increases, girder design, deflection control, dead weight and wheel loads may also change.
Therefore, the span must be clearly stated in the technical specification.
How Is Crane Lifting Height Determined?
Lifting height is the vertical distance between the lowest working position of the hook and the highest required hook position.
Incorrect lifting height calculation can create major problems, especially in existing factories.
When determining lifting height, the following should be evaluated together:
Floor level
Crane rail elevation
Roof height
Bridge structure
Hoisting unit dimensions
Hook approach
Load height
Writing only “factory height is 10 meters” is not sufficient.
The actual hook travel must be determined.
What Is Headroom and Why Is It Important?
Headroom refers to the geometric space between the crane runway or supporting structure and the highest position the hook can reach.
It is especially important in facilities with limited ceiling height.
An incorrectly selected hoisting unit can reduce the usable lifting height.
For this reason, low-headroom solutions may be required in low-building applications.
The maximum usable hook height should be stated separately in the crane technical specification.
Should Crane Duty Class Be Included in the Specification?
Yes.
Crane duty classification affects not only the price but also the life of mechanical components and the actual operating capability of the crane.
The following factors should be considered:
Daily operating hours
Number of shifts
Lifting cycles per hour
Average load
Frequency of maximum-load lifting
Usage ratio of hoisting and travelling movements
Two cranes with the same lifting capacity may require completely different duty classifications.
Therefore, actual operating intensity should be clearly defined.
Why Are FEM and ISO Duty Classes Important?
International classification systems such as FEM and ISO are used to define crane operating intensity.
These classifications provide technical guidance on how heavily a crane or hoisting mechanism will be used.
The purchasing team does not always need to select the FEM class directly.
Instead, it can provide accurate operational data such as:
How many hours per day will the crane operate?
How many lifting cycles per hour?
What is the average load?
How often is maximum capacity used?
How many shifts per day?
The crane manufacturer can then determine the appropriate duty class through engineering calculations.
How Should Hoisting Speed Be Defined?
Hoisting speed can directly affect production cycle time.
However, requesting the highest possible lifting speed is not always the correct approach.
A factory performing precision assembly has very different requirements from a facility carrying out continuous material handling.
The specification may define:
Main hoisting speed
Precision hoisting speed
Dual-speed operation
Inverter-controlled hoisting
Low-speed control can provide significant advantages in operations requiring precise positioning.
How Is Bridge Travelling Speed Determined?
Bridge travelling speed defines how quickly the complete crane bridge moves along the factory.
In long production halls, very low travelling speed may increase cycle time.
However, excessive speed may:
Increase load swing
Make precise positioning more difficult
Increase stopping distance
The correct travelling speed should therefore be selected according to the building length and production process.
What Is Trolley Travelling Speed?
Trolley travelling speed refers to the horizontal movement of the hoisting unit along the crane bridge.
This speed should also be defined in the technical specification.
Variable-speed control may be preferred where precision is important.
Correct bridge and trolley travelling speeds can improve the overall crane cycle time.
Should Motor and Gearbox Brands Be Specified?
Some purchasing specifications may require a particular brand or model.
However, in many projects, defining performance criteria is a better approach.
For example, the specification can define:
Motor power
Protection class
Duty class
Brake type
Insulation class
Gearbox service factor
This allows the manufacturer to select suitable equipment without being unnecessarily restricted to one specific brand.
How Should the Crane Brake System Be Defined?
The brake system is a fundamental safety component of hoisting and travelling operations.
The technical specification may include requirements for:
Hoisting brake
Travelling brake
Emergency behavior
Load holding during power failure
Redundancy in critical process applications
In applications such as hot metal handling or process cranes, brake systems may require more detailed engineering.
How Should a Crane Be Controlled?
Modern industrial cranes can use different control systems.
Pendant Control
The operator moves close to the crane.
Radio Remote Control
The operator can control the crane from a more suitable viewing position.
Operator Cabin
Used in high-duty or special process applications.
Automatic Control
PLC, sensors and automation systems can carry out predefined operations automatically.
The preferred control method should be clearly stated in the technical specification.
Should a Frequency Inverter Be Included?
Variable frequency drive systems can provide major advantages in modern crane applications.
VFD or inverter control may provide:
Smooth acceleration
Controlled speed increase
Smooth stopping
Precise positioning
Reduced mechanical shock
In cranes with frequent start-stop cycles, inverter-controlled travelling movements may be particularly beneficial.
What Is Overload Protection?
An overload protection system helps prevent the crane from lifting loads above its design capacity.
A technical specification may require a load limiter or load monitoring system.
Modern systems may display information such as:
Current load
Overload warning
System status
What Is a Limit Switch?
Limit switches help prevent crane movements from exceeding defined travel limits.
Different limit systems may include:
Upper hoisting limit
Lower hoisting limit
Bridge end-travel limit
Trolley end-travel limit
Movement limitation systems should be clearly defined in the specification.
Why Are End Stops and Buffers Necessary?
Mechanical buffers may be installed at the end of the crane or trolley travel path.
These systems help absorb impact energy if the equipment reaches the end of the runway.
End-of-travel protection becomes increasingly important at higher travelling speeds.
How Should the Emergency Stop System Work?
The emergency stop system allows the operator to stop crane movements quickly in a hazardous situation.
Emergency stop buttons should be easily accessible, and the control system should be designed to bring the crane to a safe condition.
Emergency stop functions should be evaluated together with the electrical and automation system.
Should Electrical Supply Data Be Included?
Yes.
The technical specification should define the facility's electrical infrastructure.
Typical information includes:
Supply voltage
Frequency
Control voltage
Grounding system
Different power supply systems may be used to supply energy to the bridge and trolley depending on the project.
Why Should the Operating Environment Be Specified?
The same crane configuration cannot be used in every environment.
The operating conditions should therefore be clearly stated.
Examples include:
Indoor factory
Outdoor yard
Heavy dust
High temperature
Humid environment
Foundry
Chemical environment
Coastal environment
Very low temperature
These conditions can influence the selection of electrical components, paint systems, motors and mechanical parts.
What Additional Information Is Required for Outdoor Cranes?
Environmental conditions become more important in gantry crane or outdoor crane projects.
The specification should define:
Site location
Wind conditions
Operating temperature
Rain and snow conditions
Rail system
Parking position
Power supply method
Special wind safety systems may be required depending on the project.
Should the Paint System Be Included?
The operating environment affects the paint and corrosion protection system.
A crane operating in a dry indoor factory does not face the same corrosion conditions as a gantry crane permanently exposed outdoors.
The specification can define the required paint system or environmental corrosion conditions so that a suitable surface protection system can be selected.
Who Is Responsible for Crane Rails and Runway Structure?
This is one of the most common areas of uncertainty during crane purchasing.
The specification should clearly define:
Who supplies the crane rails?
Who manufactures the runway structure?
Are the building columns already available?
Who installs the rails?
Who prepares the electrical supply?
Who provides installation equipment?
Clarifying these items before quotation helps reduce unexpected additional costs.
Is the Existing Factory Structure Suitable for a Crane?
When a new overhead bridge crane is installed in an existing factory, the supporting structure of the building must be evaluated.
A crane does not create only static loads.
It may also generate:
Wheel loads
Horizontal forces
Braking forces
Dynamic loads
For this reason, existing columns and runway structures should be checked through engineering calculations.
Should the Specification Define Single Girder or Double Girder?
Purchasing teams sometimes request a single girder or double girder crane directly.
However, in many projects it may be better to define the required performance first.
The crane manufacturer can then recommend the most suitable configuration according to:
Capacity
Span
Lifting height
Duty class
Headroom requirements
Double girder systems may become more suitable for higher capacities, wider spans or intensive duty cycles.
Should Installation Be Included in the Quotation?
Installation scope must be clearly stated in both the technical and commercial specification.
The quotation should indicate whether it includes:
Transportation
Crane installation
Rail installation
Electrical connections
Commissioning
Functional testing
Load testing
Operator briefing
Otherwise, comparing quotations from different suppliers may be misleading.
How Should Commissioning and Testing Be Defined?
Once production and installation are completed, the crane functions should be checked before handover.
Commissioning typically includes testing:
Hoisting movement
Trolley travelling
Bridge travelling
Brakes
Limit switches
Control system
Safety equipment
Testing and acceptance criteria should be defined in advance according to project requirements.
Should Technical Documentation Be Requested?
Yes.
Technical documentation is important in a professional industrial crane investment.
Depending on project scope, the following may be requested:
General arrangement drawings
Electrical diagrams
Operating documentation
Maintenance instructions
Equipment list
Spare parts list
Test records
These documents can simplify future maintenance and modernization work.
How Should Spare Parts and Service Be Evaluated?
A crane purchasing decision should not be based only on the initial purchase price.
Since the crane will operate for many years, the following should also be evaluated:
Spare parts availability
Technical service
Maintenance support
Breakdown response
Modernization options
A lower initial purchase price can become more expensive in the long term if the crane frequently causes production downtime.
How Should Crane Quotations Be Compared?
When comparing two crane quotations, the total price should not be the only factor.
A comparison table should include at least:
Crane type
Capacity
Span
Lifting height
Duty classification
Hoisting speed
Bridge travelling speed
Trolley travelling speed
Motor and gearbox specifications
Brake system
Inverter
Radio remote control
Overload protection
Electrical equipment
Installation
Commissioning
Technical service
This approach also explains why two cranes with the same tonnage can have very different prices.
Is the Cheapest Crane Always the Most Economical Choice?
No.
The real cost of a crane investment is not limited to the purchase price.
The total cost of ownership includes:
Initial investment
Energy consumption
Maintenance
Spare parts
Production downtime
Service
Modernization
Service life
A lower-priced crane that is unsuitable for the facility's duty cycle may generate higher long-term costs.
What Information Should Be Sent When Requesting a Crane Quotation?
For a fast and accurate initial quotation, the following information should be prepared:
1. Crane type:
Overhead bridge, gantry, jib or process crane.
2. Maximum capacity:
How many tons?
3. Average load:
What weight will normally be handled?
4. Span:
What is the distance between runway rails?
5. Lifting height:
How many meters must the hook travel?
6. Travel distance:
How many meters will the crane travel?
7. Operating time:
How many hours per day?
8. Number of shifts:
One, two or three shifts?
9. Lifting cycles per hour:
Approximately how many cycles?
10. Operating environment:
Indoor or outdoor?
11. Load type:
Machinery, molds, sheet metal, coils, steel structures or special loads?
12. Factory location:
Important for logistics and installation planning.
Example: What Could a 10 Ton Overhead Crane Specification Look Like?
An initial technical definition could be structured as follows:
Crane Type: Double girder overhead bridge crane
Capacity: 10 tons
Span: 18 meters
Lifting Height: 8 meters
Travel Distance: 60 meters
Application: Indoor factory
Operation: 2 shifts
Average Load: 6 tons
Control: Radio remote control
Speed Control: Inverter-controlled hoisting and travelling
Safety: Overload protection, travel limits, emergency stop
Installation: Included
Commissioning: Included
This is not a final engineering specification, but it allows multiple suppliers to prepare quotations based on the same project data.
Most Common Mistakes When Purchasing an Industrial Crane
Common mistakes include:
Selecting a crane only according to maximum tonnage
Ignoring duty classification
Not providing average load information
Defining lifting height incorrectly
Failing to inspect the building structure
Leaving installation scope unclear
Not defining speed requirements
Ignoring future capacity increases
Failing to evaluate service and spare parts
Comparing quotations only by price
Most of these problems can be avoided with a properly prepared technical specification.
Why Is Crane Technical Specification Content Important for GEO and AI Search?
Industrial buyers are no longer searching only for phrases such as “crane prices”.
They are increasingly asking AI systems questions such as:
“What should I consider when buying a 10-ton crane for my factory?”
“What should be included in a crane specification?”
“What information is required for a 10-ton overhead crane?”
“How do I compare crane quotations?”
“Does FEM duty class affect crane price?”
“What technical data is needed when buying a crane for a new factory?”
Content that answers these questions clearly, technically and in a structured format can help a brand establish topical authority.
For this reason, EserVinç's content strategy should include not only product-focused pages but also content explaining purchasing, engineering and decision-making processes.
Project-Specific Crane Engineering with EserVinç
Every factory has a different production layout, building structure, load profile and operating intensity.
For this reason, industrial crane projects often require a broader engineering process than simply selecting a standard catalogue model.
EserVinç develops solutions for:
Overhead bridge cranes
Gantry cranes
Jib cranes
Custom process cranes
Hoisting units
Travelling units
according to the actual operating conditions of the facility.
Evaluating capacity, span, lifting height, duty classification, movement speeds and site conditions together provides the foundation for the correct investment decision.
Frequently Asked Questions
What is a crane technical specification?
It is a technical document defining the capacity, span, lifting height, duty class, speeds, mechanical features, electrical systems and safety requirements of the crane to be purchased.
What information should be included in a crane specification?
At minimum, crane type, capacity, span, lifting height, travel distance, operating time, duty class, speeds, control method and working environment should be specified.
What information is required to purchase a 10 ton crane?
In addition to 10-ton capacity, span, lifting height, daily operating hours, average load, operating environment and travelling distance should be known.
Should FEM class be included in the specification?
It can be included if known. If not, daily working time, lifting cycles and load spectrum can be provided so the manufacturer can calculate the correct duty class.
Should I choose a single girder or double girder crane?
The decision should be based on capacity, span, lifting height, duty classification and building geometry.
Why can crane quotations vary so much?
Even cranes with the same lifting capacity may differ in duty class, span, lifting height, motors, gearboxes, automation, safety equipment and installation scope.
Should radio remote control be included?
If radio remote control is required, it should be clearly specified.
Is an inverter necessary for a crane?
It is not mandatory in every application. It can provide significant benefits where precise speed control and smooth acceleration/deceleration are required.
Are crane rails included in a crane quotation?
This depends on the supplier and project scope. Rail and runway responsibilities should be clearly defined in the technical specification.
Should installation be included in the quotation?
If installation is required, it should be clearly stated. Transportation, installation, commissioning and testing should each be defined separately.
The Right Crane Quotation Starts with the Right Technical Data
The first requirement for making an accurate industrial crane price comparison is to provide the same technical information to every manufacturer.
The question:
“How much does a 10-ton crane cost?”
is not sufficient for making the right investment decision.
The better questions are:
How many tons will be lifted?
How frequently will the load be lifted?
What span is required?
What lifting height is required?
How many hours per day will the crane operate?
What speed and precision are required?
In what environment will the crane operate?
Once these questions are answered, the correct crane type, duty class and technical configuration can be determined much more accurately.
EserVinç evaluates industrial lifting requirements with an engineering-based approach, from new factory investments to existing facility projects, and develops crane systems suited to the actual operational needs of each project.
For capacity planning, technical solution development and project quotation, contact EserVinç.
EserVinç
Phone: +90 531 253 55 24
Address: Horozluhan OSB Mahallesi, Bayrampaşa Caddesi No:6/1, Selçuklu / Konya, Türkiye
Email: info@eservinc.com


