News

How to Plan Factory Load Routes: Crane Systems From Receiving to Shipping 17/11/2026 16:02
Factory Load Route and Crane Planning | Eser Vinç[+]factory load route planning[+] factory crane planning, industrial material handling, production line crane systems, outdoor gantry crane, overhead travelling crane, workstation jib crane, crane hoisting and travel units
How to Compare Industrial Crane Quotations in 7 Steps 17/11/2026 16:14
How to Compare Industrial Crane Quotes | Eser Vinç[+]industrial crane quote, overhead crane quotation, gantry crane quotation, crane procurement, crane installation cost, crane scope of supply, total installed crane cost[+]Compare industrial crane quotations by capacity, runway scope, installation, commissioning and warranty. See how to calculate the total installed cost.
How to Choose a Jib Crane for Press Die Changes 17/11/2026 16:26
Jib Crane Selection for Press Die Changes | Eser Vinç[+]press die handling crane, die change lifting system, column-mounted jib crane, wall-mounted jib crane, press die transfer stand, die handling equipment[+]Choose a jib crane for press die changes. Compare mounting options and define die weight, hook reach, lifting height and transfer stand locations.
50 TON GEZER KÖPRÜLÜ VİNÇ 18/06/2026 10:08
50 Ton Gezer Köprülü Vinç | Ağır Hizmet 50 Ton Vinç Sistemleri[+]50 ton gezer köprülü vinç teknik özellikleri, ağır hizmet çift kiriş sistemler ve Eser Vinç mühendislik çözümleri[+]50 ton gezer köprülü vinç teknik özellikleri, ağır hizmet çift kiriş sistemler ve Eser Vinç mühendislik çözümleri
PORTAL VİNÇ FİYATLARI 18/06/2026 10:05
Portal vinç fiyatları 2025 rehberi. 10 ton, 20 ton ve 50 ton portal vinç maliyetlerini etkileyen faktörler ve Eser Vinç çözümleri.[+]Portal vinç fiyatları 2025 rehberi. 10 ton, 20 ton ve 50 ton portal vinç maliyetlerini etkileyen faktörler ve Eser Vinç çözümleri.[+]Portal vinç fiyatları 2025 rehberi. 10 ton, 20 ton ve 50 ton portal vinç maliyetlerini etkileyen faktörler ve Eser Vinç çözümleri.

Categories

Images
23/10/2023 13:53

What Is a Billet Handling Crane?

What Is a Billet Handling Crane?

A billet handling crane is a specialized process crane designed to transport steel billets between production lines, cooling areas, storage yards, rolling mills, shipping zones and other process points in iron and steel facilities.

In international technical terminology, these systems are commonly referred to as:

  • Billet Handling Crane

  • Billet Crane

  • Magnetic Billet Crane

  • Steel Billet Handling Crane

Billets should not be treated like standard palletized loads.

The following characteristics directly affect crane and lifting attachment design:

  • Billet length

  • Cross-section

  • Weight

  • Surface temperature

  • Stacking arrangement

  • Number of billets handled per cycle

  • Orientation within the production line

For this reason, a billet crane project should not be defined only by saying:

“We need a 20 ton crane.”

The more important questions are:

How long are the billets?

How many billets will be lifted in one cycle?

What is the total suspended load?

Are the billets hot or at ambient temperature?

Can the material be handled magnetically?

Does the billet orientation need to be changed?

How many cycles per hour will the crane perform?

Does the production line operate continuously?

These parameters form the basis of billet crane engineering.

Where Are Billet Handling Cranes Used?

Billet cranes can be used at different stages of steel production.

Typical application areas include:

  • Iron and steel plants

  • Steel mills

  • Rolling mills

  • Continuous casting lines

  • Billet storage yards

  • Steel service centers

  • Metal processing facilities

  • Heavy industrial plants

  • Steel shipping areas

  • Production and intermediate storage zones

Depending on process design, a billet crane may perform:

  • Billet removal from the production line

  • Transfer to cooling areas

  • Stacking

  • Retrieval from storage

  • Rolling mill feeding

  • Truck or rail wagon loading

  • Transfer between production sections

What Is a Billet?

The term billet generally refers to a semi-finished steel product produced in a defined cross-section for subsequent rolling or manufacturing processes.

Billet dimensions and geometry may vary depending on the production process.

For this reason, a “billet handling crane” should not be understood simply as a crane with a specific tonnage.

It is a complete process handling system designed to move long steel products safely, consistently and efficiently.

How Does a Billet Handling Crane Work?

Billet handling cranes are commonly engineered using an overhead process crane configuration.

The main movements include:

Hoisting

The billet or billet group is moved vertically.

Trolley Travelling

The lifting attachment travels horizontally along the bridge.

Bridge Travelling

The crane moves forward and backward along the facility.

Unlike a standard hook crane, billet handling systems may use:

  • Electromagnets

  • Magnetic lifting beams

  • Mechanical spreader beams

  • Special gripping devices

  • Multi-point lifting systems

For long steel products, several magnets may be distributed along a lifting beam to achieve controlled and balanced lifting.

What Is a Magnetic Billet Crane?

A magnetic billet crane is a process crane that uses an electromagnetic lifting system to handle steel billets.

Where the steel product has suitable magnetic properties, one or more lifting magnets are positioned over the load.

Once magnetization is established, the billet can be:

  1. Picked up from the floor or storage area

  2. Lifted

  3. Transported

  4. Positioned

  5. Released in a controlled manner

Because the billets do not need to be individually attached with slings, magnetic handling can provide an important operational advantage in repetitive production environments.

However, the magnetic system should not be treated as a separate accessory.

The crane, lifting beam, magnets, electrical system and control architecture should be engineered as one integrated lifting system.

Why Are Multiple Magnets Used for Billet Handling?

Steel billets are long products.

When a long load is lifted, the following become important:

  • Balance

  • Load distribution

  • Bending behavior

  • Controlled handling

For this reason, magnets may be distributed at several points along a lifting beam.

The number and spacing of magnets should be determined according to:

  • Billet length

  • Cross-section

  • Weight

  • Number of billets lifted simultaneously

  • Stacking geometry

The objective is to distribute lifting forces appropriately along the length of the product.

What Is a Spreader Beam Billet Crane?

A spreader beam billet crane uses a lifting beam to support controlled lifting from multiple points along the load.

The spreader beam may incorporate:

  • Magnets

  • Mechanical lifting points

  • Special gripping systems

One of the main functions of the beam is to distribute lifting forces across the length of the billet.

This becomes especially important when handling:

  • Long billets

  • Multiple billets in one cycle

  • Long steel sections

  • Loads where stacking orientation must be maintained

How Is Spreader Beam Length Determined?

Spreader beam length should not be selected only according to the longest billet.

The following should also be considered:

  • Minimum billet length

  • Maximum billet length

  • Billet weight

  • Lifting point locations

  • Number of magnets

  • Spacing between magnets

  • Storage layout

  • Truck, wagon or platform dimensions

Some facilities handle billets of a single standard length, while others process several different product sizes.

The lifting beam should therefore be designed according to the actual production mix.

What Is a Fixed Trolley Billet Crane?

In a fixed trolley system, the orientation of the lifting mechanism and attachment remains in a defined position relative to the crane bridge.

This configuration may be suitable where billets are always handled in the same direction.

For example, if billets are:

  • Picked up from a production line

  • Moved to a parallel storage area

  • Placed down in the same orientation

there may be no requirement for rotation.

In such cases, a fixed trolley can provide a simpler process configuration.

What Is a Rotating Trolley Billet Crane?

A rotating trolley billet crane is a specialized process crane that allows the suspended billet or lifting beam to change orientation in the horizontal plane.

This type of system is useful where simple X-Y movement is not sufficient.

For example, a billet may need to be:

  • Removed from one production line

  • Rotated by 90 degrees

  • Transferred to a storage area with a different orientation

  • Positioned onto a rolling line facing another direction

Instead of redesigning the entire crane geometry, a rotating trolley or rotating spreader beam can be used.

Fixed Trolley or Rotating Trolley?

The correct choice depends on the plant layout.

A Fixed Trolley May Be More Suitable When:

  • Billets are always transported in the same orientation

  • Storage and production lines are parallel

  • No load rotation is required

  • The process geometry is simple

A Rotating Trolley May Be More Suitable When:

  • Billet orientation must be changed

  • Production lines are arranged at different angles

  • Storage direction differs from production direction

  • Billets require rotational positioning

A rotating mechanism should not be selected simply because it is more advanced.

There should be a real process requirement.

How Is Billet Crane Capacity Calculated?

Billet crane capacity should not be based only on the net weight of the steel product.

The total suspended load may include:

  • Billets

  • Lifting beam

  • Magnets

  • Suspension equipment

  • Connecting components

For example:

Billets: 16 tons
Lifting beam and magnetic system: 4 tons

The hoisting system must therefore be evaluated for a total suspended load of approximately 20 tons.

For this reason, saying:

“Our product weighs 16 tons.”

is not enough to determine crane capacity.

Can Multiple Billets Be Lifted at the Same Time?

Yes, depending on the project.

Magnetic spreader systems can be designed to lift multiple billets in one cycle where load and process conditions are suitable.

However, the following should be calculated together:

  • Total weight

  • Billet arrangement

  • Magnet contact points

  • Load balance

  • Spreader beam capacity

  • Crane capacity

The objective should not be to lift the maximum possible number of billets.

The objective should be to create a controlled and repeatable handling process.

Why Is Billet Temperature Important?

Billets may not always be at ambient temperature.

Products coming from continuous casting or hot production processes may have elevated surface temperatures.

High temperature can affect:

  • Magnets

  • Cables

  • Electrical equipment

  • Sensors

  • Lifting beams

  • Crane components

For this reason, billet temperature should be specified when requesting a magnetic billet crane.

Can Standard Magnets Be Used for Hot Billets?

It should not be assumed that a standard magnet is suitable for every hot billet application.

The magnet operating condition should be evaluated according to:

  • Billet temperature

  • Contact duration

  • Cycle frequency

  • Ambient temperature

  • Magnet construction

One of the first technical questions in a hot billet project should therefore be:

“What is the approximate billet surface temperature when it contacts the magnet?”

Why Is Duty Class Important for Billet Cranes?

Billet cranes often operate as high-cycle process equipment.

A crane may:

  • Remove billets from production

  • Stack them

  • Retrieve them from storage

  • Feed a rolling mill

  • Support shipping operations

These activities may continue throughout the entire shift.

Duty classification should therefore consider:

  • Daily operating hours

  • Number of shifts

  • Cycles per hour

  • Average load

  • Frequency of maximum load

  • Total suspended load

Why Is a Billet Crane Considered a Process Crane?

Because the crane directly participates in production material flow.

If the crane stops, it may affect:

  • Storage

  • Line feeding

  • Transfer

  • Shipping

A billet handling crane should therefore not be engineered using the same approach as a standard maintenance overhead crane.

Billet cranes belong to the process crane family together with ladle, charging, tundish and scrap handling cranes.

What Is the Difference Between a Billet Crane and a Scrap Handling Crane?

Both systems may operate in the same steel plant, but they handle completely different load types.

Billet Crane

Handles semi-finished steel products with defined dimensions and geometry.

Important criteria include:

  • Billet length

  • Load orientation

  • Magnet distribution

  • Spreader beam geometry

  • Precise stacking

Scrap Handling Crane

Handles irregular and mixed metal scrap.

It may use:

  • Round lifting magnets

  • Orange peel grabs

  • Buckets

Both may use magnetic technology, but the magnet geometry and process requirements are different.

What Is the Difference Between a Billet Crane and a Ladle Crane?

A billet crane handles solid steel products.

A ladle crane handles ladles containing molten metal.

Ladle crane design places greater emphasis on:

  • Molten metal

  • Critical load handling

  • Brake architecture

  • Redundancy

  • Safety scenarios

Billet crane design places greater emphasis on:

  • Repetitive handling

  • Magnet and spreader systems

  • Product orientation

  • Stacking

  • Cycle time

Is a Billet Crane the Same as a Plate Handling Crane?

No.

Steel billets and steel plates have different geometries.

Steel plates are wide and relatively thin, while billets have a more compact cross-section and elongated form.

Therefore:

  • Magnet type

  • Magnet arrangement

  • Spreader beam geometry

  • Lifting points

may need to be different.

Below-the-hook equipment should be selected according to product geometry.

Why Is Billet Stacking Important?

A billet crane often performs more than simple point-to-point transport.

Billets may need to be stacked in an organized manner.

Stacking arrangement can affect:

  • Storage capacity

  • Product accessibility

  • Downstream process speed

  • Shipping planning

For this reason, precise trolley and bridge movement may become important.

What Are the Benefits of an Inverter-Controlled Billet Crane?

Variable frequency drives can help control crane acceleration and deceleration.

Depending on the application, they may provide:

  • Smooth starting

  • Smooth stopping

  • Multiple speed levels

  • Precise positioning

  • More controlled load movement

This can be particularly useful when handling long spreader beams and billet groups.

Why Is Load Swing Important in Billet Handling?

A long spreader beam carrying a billet group may swing during acceleration and braking.

Excessive swing can:

  • Make stacking more difficult

  • Increase cycle time

  • Reduce positioning accuracy

For this reason, bridge and trolley motion characteristics should be selected according to process requirements.

Is Load Swing More Critical in Rotating Systems?

Rotating trolley or rotating spreader systems involve both translational and rotational movement.

For long billet groups, the following should therefore be coordinated:

  • Rotation speed

  • Acceleration and stopping behavior

  • Load center

  • Spreader beam geometry

Is an Operator Cabin Required?

The control system depends on plant conditions.

Possible options include:

  • Operator cabin

  • Radio remote control

  • Fixed control station

  • Semi-automatic control

  • Automation

In high-cycle steel plants, the operator may need clear visibility of:

  • Billet storage

  • Magnets

  • Platforms

  • Rolling line

  • Shipping area

Can a Billet Handling Crane Operate Automatically?

Yes, depending on the application.

An automated system may:

  • Travel to predefined storage coordinates

  • Pick up defined loads

  • Transfer them to target areas

  • Operate according to production recipes

  • Integrate with stock management systems

Automation should be designed according to the actual process.

The objective is not simply to remove the operator, but to improve consistency in repetitive material handling.

Why Is Magnetic Safety Important?

In electromagnetic lifting systems, load retention is directly connected to the electrical system.

For this reason, the following should be evaluated on a project-specific basis:

  • Magnet power supply

  • Power-loss scenarios

  • Alarm systems

  • Control circuits

  • Operating procedures

Safety architecture should be defined according to the magnet technology, risk analysis and plant conditions.

Can a Billet Crane Be Used Outdoors?

Yes, under suitable project conditions.

If billet storage is located outdoors, a Gantry Crane / Portal Vinç based steel handling solution may be considered instead of a conventional overhead bridge crane.

Outdoor applications should also evaluate:

  • Wind

  • Rain and snow

  • Corrosion

  • Rail systems

  • Drainage

  • Outdoor electrical protection

Overhead Billet Crane or Gantry Crane?

The correct choice depends on facility architecture.

Overhead Billet Crane

Can be suitable for enclosed production halls or facilities with suitable crane runways.

Gantry Crane / Portal Vinç Billet Handling System

Can be considered for outdoor stockyards or applications requiring a crane structure more independent from the building.

The selection should consider:

  • Yard width

  • Building structure

  • Rail route

  • Storage layout

  • Environmental conditions

  • Capacity

What Determines Billet Crane Prices?

There is no single standard billet crane price.

Main cost factors include:

  • Capacity

  • Bridge span

  • Lifting height

  • Travel distance

  • Duty class

  • Spreader beam design

  • Number of magnets

  • Magnet type

  • Fixed or rotating trolley

  • Hoisting unit

  • Motor-gearbox systems

  • Inverter systems

  • Control method

  • Operator cabin

  • Automation

  • Rail system

  • Installation

  • Commissioning

For this reason, the question:

“How much does a 20 ton billet crane cost?”

cannot be answered accurately from capacity alone.

What Information Is Required for a Billet Crane Quotation?

A technical quotation should include as much of the following information as possible.

1. Billet Weight

How much does one billet weigh?

2. Billet Length

What are the minimum and maximum lengths?

3. Cross-Section

What are the billet dimensions and geometry?

4. Number of Billets per Cycle

How many billets will be handled simultaneously?

5. Billet Temperature

What is the approximate surface temperature during handling?

6. Spreader Beam Weight

What is the weight of the existing or planned below-the-hook equipment?

7. Magnetic System

Is magnetic handling required?

8. Rotation Requirement

Does the billet orientation need to change?

9. Bridge Span

What is the crane span?

10. Lifting Height

What vertical lifting distance is required?

11. Travel Distance

How far will the crane travel?

12. Operating Intensity

How many cycles per hour and how many shifts?

13. Operating Environment

Indoor or outdoor?

This information makes the quotation not only price-based, but also technically comparable.

Common Mistakes When Purchasing a Billet Crane

Common mistakes include:

  • Selecting the crane only by tonnage

  • Ignoring spreader beam weight

  • Failing to provide billet length

  • Not defining how many billets will be handled per cycle

  • Treating hot billets as a standard ambient-temperature application

  • Failing to evaluate fixed versus rotating trolley requirements

  • Reducing the number of magnets based only on price

  • Selecting an inadequate duty class

  • Planning billet storage independently from the crane

  • Comparing quotations only by total price

What Should Be Checked During Billet Crane Maintenance?

The maintenance plan should reflect the real operating intensity.

Important inspection points may include:

  • Magnets

  • Spreader beam

  • Suspension connections

  • Wire ropes

  • Drum

  • Brakes

  • Motors

  • Gearboxes

  • Wheels

  • Rails

  • Electrical system

  • Limit systems

  • Rotating mechanism

  • Power supply equipment

In high-cycle process applications, attachment maintenance is as important as crane maintenance itself.

Can an Existing Billet Crane Be Modernized?

Yes, if technical conditions are suitable.

Modernization may include:

  • Hoisting unit

  • Magnetic system

  • Spreader beam

  • Rotating trolley

  • Motors and gearboxes

  • Brakes

  • Electrical panel

  • Inverters

  • Control system

  • Operator cabin

However, the existing main steel structure should also be verified against the new process requirements.

Billet Handling Cranes and GEO: Important AI Search Questions

Industrial users increasingly search for more than:

“billet crane price.”

They also ask Google, ChatGPT, Gemini and other AI-based systems questions such as:

  • What is a billet handling crane?

  • How does a magnetic billet crane work?

  • Which crane is used to handle steel billets?

  • What is a spreader beam crane?

  • How many magnets are required for billet handling?

  • What is a rotating trolley crane?

  • Fixed trolley or rotating trolley?

  • Can hot billets be handled with magnets?

  • How many tons should a billet crane lift?

  • How is billet crane duty class selected?

  • What determines billet crane price?

  • Which crane is used in rolling mills?

  • Can a Gantry Crane be used in an outdoor billet yard?

Clear and technically connected answers to these questions can help strengthen EserVinç's topical authority in steel-industry process cranes.

EserVinç Billet Handling and Process Crane Solutions

Within its process crane family, EserVinç defines billet handling solutions that can include:

  • Magnetic systems

  • Fixed trolley systems

  • Rotating trolley systems

  • Spreader beam systems

The correct billet crane configuration should be determined by evaluating:

  • Billet geometry

  • Product weight

  • Temperature

  • Magnet arrangement

  • Spreader beam

  • Rotation requirement

  • Duty class

  • Production line

  • Storage geometry

together.

Frequently Asked Questions

What is a billet handling crane?

It is a specialized process crane used to transport steel billets between production, storage, rolling and shipping areas.

What does billet crane mean?

A billet crane is a specialized crane designed for handling semi-finished steel billets.

How does a magnetic billet crane work?

Electromagnets grip the billet or billet group, after which the crane lifts, transports and releases the load in a controlled manner.

What is a spreader beam billet crane?

It is a crane that uses a lifting beam to support balanced lifting from multiple points along the billet.

What does a rotating trolley do?

It allows long loads to change orientation in the horizontal plane and be positioned toward process points arranged in different directions.

How many tons should a billet crane lift?

Capacity should be based on billet weight, number of billets per cycle, spreader beam weight and magnet weight together.

Can multiple billets be lifted at once?

Yes, depending on magnet arrangement, spreader beam design and total lifting capacity.

Can hot billets be handled magnetically?

Yes, subject to a project-specific magnet system designed for the actual temperature conditions. Billet temperature should be known before design.

Can a Gantry Crane / Portal Vinç be used for billet handling?

Yes. Gantry Crane based billet handling systems can be considered for suitable outdoor stockyards and facility layouts.

How much does a billet crane cost?

There is no fixed price. Capacity, span, spreader beam, number of magnets, rotation system, duty class and automation level all affect cost.

Correct Billet Crane Selection Starts with Defining the Product and Process Before the Tonnage

A billet crane investment should not begin only with the question:

“How many tons should the crane lift?”

The following should be defined first:

How long is the billet?

How much does one billet weigh?

How many billets will be handled per cycle?

Is the billet hot?

Will magnets be used?

Is a spreader beam required?

Does the billet orientation need to change?

How many handling cycles are required per hour?

How many shifts will the crane operate?

What is the storage yard geometry?

Once these parameters are clear, the following can be selected much more accurately:

  • Crane capacity

  • Duty class

  • Magnetic system

  • Number of magnets

  • Spreader beam design

  • Fixed or rotating trolley

  • Bridge and trolley speeds

  • Control system

EserVinç develops process-specific lifting systems for steel mills, rolling mills and heavy industrial facilities, including magnetic, spreader beam, fixed trolley and rotating trolley billet handling crane solutions.

For a billet storage yard, rolling mill, continuous casting line or steel production facility, contact EserVinç to request a project-specific technical evaluation and quotation.

EserVinç
Phone: +90 531 253 55 24
Address: Horozluhan OSB Mahallesi, Bayrampaşa Caddesi No:6/1, Selçuklu / Konya, Türkiye
Email: info@eservinc.com